How to Remove Tile Cement from Floor? Easy Steps to Remove
After removing the tiles from the floor, there you will find tile cement thin-set left. And without removing them, you won’t be able to work on that floor again. As you know, once the cement gets hardened, it’s quite difficult to remove them but not that hard.
By using the proper equipment or technique, you can remove the tile cement thin-set from the floor quite easily. Generally, a rotary drill with a thinset chisel is used for removing tile cement from the floor.
In today’s article, we have shared the procedure for removing tile cement from the floor. So, read on and find out how to do so. Let’s begin then!
Things You Will Need for Removing Tile Cement from the Floor
For removing tile cement from the floor, you will require a few things. With proper equipment, the work can be done quickly and easily. Besides that, don’t forget to wear safety gear while working as concrete dust can do immense damage to the internal part of your body.
Here are the things that you will require –
- A rotary hammer drill.
- Thinset chisel.
- Water.
- Spray bottle.
With these 4 things, you can remove the tile cement with ease. Now, let’s find out how to do so in the next segment, don’t fall asleep as we are going to do ra-ta-ta-ta with the rotary hammer drill.
2 Steps for Removing Tile Cement from the Floor
For removing tile cement from the floor with a rotary hammer drill, we will require 2 simple steps and then we will be able to remove the leftover tile cement from the floor. Gear up with safety gear and then follow the steps below.
Step 1: Prepare the Surface
First, we will need to prepare the floor. We will use water on the tile cement. By doing so, the bonding of the cement will reduce, and will be easy to remove them. First, take a spray bottle, and pour water into it.
Spray water all over the tile cement applied area, and wait for a couple of minutes.
Step 2: Start the Removal Process
Now, it’s time to start removing the tile cement from the floor. Attach the thinset chisel to the rotary hammer drill. After preparing the drill, hold it 45 degrees to the floor and start moving the drill continuously across the floor.
While using the drill machine, make sure you are using it at a constant speed. Avoid using it at a higher speed as it can damage your floor.
Do drilling until you have finished the removal task.
Alternative Way
As we have mentioned earlier that using a rotary hammer drill is the fastest and easiest way to remove cement tile from the floor. There are other ways too. But they are time-consuming and you will need to use your muscle power for using them to remove cement.
You can use San Angelo digging bar or Steel bit scrapper for removing tile cement from the floor. The process is the same as the rotary drill machine. Prepare the surface with water, hold the digging bar or bit scrapper at 45 angles, and then start the removal job.
FAQs (Frequently Asked Questions and Answers)
How do you remove tile cement glue?
Removing glue from the floor is quite easy. You can use either a dryer or adhesive removal agent for getting your job done. For the dryer, warm the glue-applied surface with the dryer. After getting heat, the bond between the surface and the glue will be loosened. And then you can remove them easily.
Can I grind for removing the tile thinset from the concrete floor?
Yes, you can grind the floor for removing the tile thinset. With time, mortar or thinset gets hardened, and removing hardened mortar is quite difficult. With a rotary hammer drill, you may fail to remove all of the thinset. There you can use an angle grinder for removing leftover thinset.
Conclusion
Lastly, either you can use a machine or equipment like San Angelo digging bar or Steel bit scrapper for removing tile cement from the concrete floor. If you want to finish it quickly and with ease then you should use the rotary hammer drill. And after removing if still, the surface is uneven and rough then use an angle grinder for making the surface even.
